TMS® Operator Interface
Displays tire pressure data for each allocated wheel and any alarm conditions are displayed. The operator interface logs tire data into memory for later recall and each record is time stamped. The operator interface is connected to the receiver via a cable so that it can be sited in the best position for the driver to see.
- Connects to the receiver
- 3m long cable to allow the unit to be placed in a good location for the driver to see it
- Displays real time data for each sensor
- Logs with real time clock for effective tire analysis
- Configured via TMS® Manager
- Display for up to 6 tire configurations over 2 or 3 axles
- Display for up to 16 tire configurations over 8 axles
- Supports alarms: low pressure, high pressure, high temperature, low sensor battery and reception timeout
- Audible alarm
- Alarms can be cancelled by removing the fault condition (note that the alarm will remain flagged in the receiver memory)
- Back light
- Serial connector to allow PC to be connected easily (without having to connect to the receiver which may be under the seat or other inconvenient location)
- Robust extruded aluminium enclosure
- 170x81x30mm 305g
You can find the current operator interface here.
